When choosing tiles there are lots of different things to think about – the material, colour, shape and size just to name a few. Depending on where you are going to be using your tiles, slip resistance is another thing to keep in mind. In most areas of the home a standard tile is fine, however if you are looking for tiles for a wet room, external use or swimming pool surround it’s something you should consider.
There are some important things to note when choosing tiles based on their slip resistance ratings. No tile is slip proof – some commercial tiles have extremely high slip resistant ratings but slips can still occur. Contaminants on either the floor or soles of feet/shoes can cause slip hazards, so it’s important to try and keep these as clean and dry as possible. Hand rails should be installed where necessary, for example on ramps. Grouted joints will add extra slip resistance – mosaic tiles have added grip thanks to the additional grout lines, however we do not recommend glass mosaic tiles for floors.
Our range of external Valverdi and PorcelPave tiles all have a slip resistance rating of R11, so they are perfect for use on terraces, balconies, pathways, patios and swimming pool surrounds. Remember that the higher the slip resistance rating, the rougher the surface of the tile will be – this is why we offer different tiles for internal and external use. Make sure you are protecting the surface of tiles prior to grouting, as grout can dry on the surface of the tile and becomes extremely hard to remove.
The below tables show the ratings we currently use for our tiles – if you are not sure which tiles are suitable for your project please get in touch so we can help.
During the Inclined Ramp Test a tiled ramp is lubricated and gradually inclined to find the slipping angle of the tile. The subject wears shoes with a standardised rubber sole during the testing.
|R9||Low Friction||Suitable for dry internal domestic floors, e.g. kitchens, dining areas, hallways.|
|R10||Medium Friction||Suitable for internal domestic floors subject to occasional wetting, e.g. bathrooms.|
|R11||Increased Friction||Suitable for external areas e.g. patios and walkways, dressing rooms, public toilets.|
Some tiles have an additional rating, where the above test is conducted with bare feet – these tiles will have both an R rating and an A-C rating.
|A||Dry barefoot areas.|
|B||Pool surrounds & showers.|
|C||Wet ramps, walk through pools & jacuzzi floors.|
Please Note: These tests are conducted by our suppliers so not all tiles currently have ratings, we are constantly updating our information – see our brochures for further information.2
© 2015 The London Tile Co. All rights reserved. Hampshire Tile Warehouse Ltd. 1 Hollybush Lane, Ash Vale, GU11 2PX