Genesis Metal Tile Trim

Genesis Metal Tile Trim has been designed to protect corners and avoid the unsightly and fragile 45 degree cut. The defined square edge clearly outlines coverings such as rectified porcelain, these profiles offer a practical and aesthetic solution, ideal for walls and floors. Available in polished, brushed, stone effect or powder coated aluminium, the trims are 2.5m long and are available in the following sizes; 6mm, 8mm, 10mm, 12mm and 15mm.

You can order the tile trims you require easily online, or pop into one of our branches across the South of the UK.

Installing Genesis Metal Tile Trims:

• Select an ESA trim that fits the thickness of your tiles
• Trowel tile adhesive over the area that forms the perimeter of the tiled covering
• Press the perforated anchoring leg into the tile adhesive and align, mechanical fix if required
• Trowel additional adhesive over the perforated anchoring leg to ensure full coverage
• Solidly embed the tiles so that the tiled surface is flush with the top of the profile
• The profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower
• Fill the joint completely with grout