Marmox Sloping Board 10mm to 33mm (1200 x 1200mm) Marmox Sloping Board 10mm to 33mm (1200 x 1200mm) MARMOX <h1>Marmox Sloping Board</h1> <p>Marmox Sloping Board is made from the same materials as Multiboard tile backer boards so it has all the same great features including being waterproof, insulating, lightweight and perfect for tiling. The difference is that Sloping Board has a gradient thickness - from 33mm thick at one end and tapering down to 10mm at the other. This allows a 20mm thick standard Multiboard to be fixed underneath a sloping board (+ 3mm of adhesive) which would then have a total height of 33mm so the next Sloped Board can be butted up to it to further extend the slope.</p> <h2>Marmox Sloping Board on Balconies</h2> <p>Sloping Board was originally designed for use on external balconies and terraces. It has a low-porosity polymer concrete coating that is resistant to freeze/thaw and moisture damage, and the core is completely impermeable to water. The boards coefficient of thermal expansion has been engineered to be similar to that of ceramic tiles, so expansion and contraction due to external temperature variation will be the same in both the tiles and the Marmox base - avoiding any cracks in the grout or any stresses developing in the tile adhesive.</p> <h2>Marmox Sloping Board in Wet Rooms</h2> <p>A large wet room or communal shower often has a drainage channel installed at the wall & floor junction, requiring the whole floor to slope towards it. Marmox Sloping Board allows you to create this easily by combining them with standard boards.</p> <h3>Fixing Marmox Sloping Board</h3> <p>Marmox Sloping Board must be fully supported. It cannot span joists and should be on a flat level surface. Comb a full bed of cement based tile adhesive over the surface of the Sloping Board or onto the floor using a 6mm or 8mm trowel, a 20mm trowel can be used for uneven floors. Place the Sloping Board side by side with the thin edge closest to the wall or butted up to where the drain will be and push firmly onto the floor. To extend the area out further, lay down standard 20mm Multiboard and then sit another Sloping Board on top, stick the Multiboard together with flexible cement based tile adhesive. Tape all the joints with Marmox Reinforcing Tape or Waterproof Tape in wet areas.</p><p>Each board measures 1200x1200mm.</p> Tile Backer Insulation Boards > Standard Tile Backer Boards > Marmox MXSB MXSB 68.28 The London Tile Co.
HomeTile Backer Board › Marmox Sloping Board 10mm to 33mm (1200 x 1200mm)

Marmox Sloping Board 10mm to 33mm (1200 x 1200mm)

View our Tile Brochure »
Tile Brochure

Marmox Sloping Board 10mm to 33mm (1200 x 1200mm)

Item #
MXSB
PRICE
£68.28 each
Quantity
each
Your Total

Delivery Info.

Express Delivery Time: 1 - 2 Days*

Delivery: FREE on ancillary orders over £150!*

* Orders completed and payment cleared by 12 noon, delivery conditions for mainland UK only, exclusions apply.
See our delivery page for full details and other locations.

Marmox Sloping Board

Marmox Sloping Board is made from the same materials as Multiboard tile backer boards so it has all the same great features including being waterproof, insulating, lightweight and perfect for tiling. The difference is that Sloping Board has a gradient thickness - from 33mm thick at one end and tapering down to 10mm at the other. This allows a 20mm thick standard Multiboard to be fixed underneath a sloping board (+ 3mm of adhesive) which would then have a total height of 33mm so the next Sloped Board can be butted up to it to further extend the slope.

Marmox Sloping Board on Balconies

Sloping Board was originally designed for use on external balconies and terraces. It has a low-porosity polymer concrete coating that is resistant to freeze/thaw and moisture damage, and the core is completely impermeable to water. The boards coefficient of thermal expansion has been engineered to be similar to that of ceramic tiles, so expansion and contraction due to external temperature variation will be the same in both the tiles and the Marmox base - avoiding any cracks in the grout or any stresses developing in the tile adhesive.

Marmox Sloping Board in Wet Rooms

A large wet room or communal shower often has a drainage channel installed at the wall & floor junction, requiring the whole floor to slope towards it. Marmox Sloping Board allows you to create this easily by combining them with standard boards.

Fixing Marmox Sloping Board

Marmox Sloping Board must be fully supported. It cannot span joists and should be on a flat level surface. Comb a full bed of cement based tile adhesive over the surface of the Sloping Board or onto the floor using a 6mm or 8mm trowel, a 20mm trowel can be used for uneven floors. Place the Sloping Board side by side with the thin edge closest to the wall or butted up to where the drain will be and push firmly onto the floor. To extend the area out further, lay down standard 20mm Multiboard and then sit another Sloping Board on top, stick the Multiboard together with flexible cement based tile adhesive. Tape all the joints with Marmox Reinforcing Tape or Waterproof Tape in wet areas.

Each board measures 1200x1200mm.

For more information, please refer to the Marmox Sloping Board information sheet and the Marmox Sloping Board Fitting Instructions.

Delivery Times

Delivery times for all delivery services are Monday to Friday (excluding Bank Holidays) 8am - 6pm.

A 'working day' is Monday to Friday, excluding bank holidays. Weekends and bank holidays do not count as working days.

Delivery Costs

For information on delivery costs, please visit the main Delivery page.

Delivery Damages

It's important that you indicate the damages on the delivery note when you sign for the goods. Notify The London Tile Company by calling our advice line on 0333 320 80 48 if there are any damages or irregularities to your order within 24 hours of delivery.

Enquiries Only 0333 320 80 48
Your Basket
0 Basket
SOCIAL
thelondontileco in Ash Vale, Hampshire, UK on Houzz thelondontileco in Ash Vale, Hampshire, UK on Houzz

We accept the following payment methods

PayPal SagePay Visa Verified by Visa MasterCard MasterCard Secure Code MasterCard ID check Certified Google

© 2020 The London Tile Co. All rights reserved.

Hampshire Tile Warehouse Ltd. 1 Hollybush Lane, Ash Vale, Hampshire, England. GU11 2PX, GB

Company No. 1224335 | VAT No. GB 213 1387 01.