Schluter DITRA-HEAT-DUO Underfloor Heating Kit 5.6m2

View our Tile Brochure »
Tile Brochure
Schluter DITRA-HEAT-DUO Underfloor Heating Kit 5.6m2

Hover to zoom or click for a popup.

Schluter DITRA-HEAT-DUO Thermal Break Underfloor Heating Kit 5.6m2

Schluter DITRA-HEAT-DUO Underfloor Heating Kit 5.6m2 from London Tile. Find Schl├╝ter products in our huge range of Underfloor Heating Supplies. Free delivery on orders over £50.

Item #: SHDHTBS6

£703.20 each

Delivery Time: 1 - 2 day deliveryDelivery: FREE on orders over £50!*

Schlüter DITRA-HEAT-DUO is an electric underfloor heating system that incorporates a decoupling membrane and thermal break. The polyethylene matting has a cut-back stud structure, with a special 2mm thick anchoring fleece on the underside. This fleece allows the matting to adhere well to the adhesive, while also reducing impact sound and enabling a faster heat up response. The Schlüter DITRA HEAT heating cables are installed in the uncoupling mat in the areas of the floor that are to be heated, overall the thickness of the system is approximately 7.5mm. Due to the flexible control of temperatures and heating times provided by the Schlüter floor thermostat, you can use Schlüter DITRA HEAT TB to create warm tiles whenever and wherever you choose.

Advantages of the Schlüter DITRA-HEAT-DUO Electric Underfloor Heating System

  • Pleasant room climate
    The system uses mild radiated heat allowing climate control to suit any requirement.
  • Precise control
    Due to the digital floor thermostat, preferred temperatures can be set easily and precisely in every room.
  • Cost efficient
    Cost efficient to buy, install and maintain.
  • Durable
    Schluter DITRA HEAT TB floor heating systems have a long service life.
  • Maintenance free
    There is no wear and tear, making the system virtually maintenance free.
  • Easy to retrofit
    Quick and easy to install, low height ideal for refurbishment.
  • Simple to install
    The heating cables are installed in the uncoupling mat, with tiles fixed directly above them.
  • Complete packaged kits
    Practical sets for common room configurations that include all necessary system components in the right dimensions making selection simple.
  • Suitable for allergy sufferers
    The space is heated from the floor up, so that no allergens are distributed.
  • Thermal break
    Anchoring fleece provides thermal break which enables faster heat-up response & additional insulation.
  • Flexible
    DITRA HEAT TB is suitable for installation on both walls and floors.
  • Decoupling
    Uncoupling matting bridges tension cracks, stopping them from transferring to the tiled covering.
  • Waterproof
    DITRA matting is waterproof providing the correct installation methods are followed.
  • Load distribution
    Stud structure and thin bed adhesive filling transfers loads directly to the substrate.
  • Sound reduction
    Certified impact sound reduction of up to 13dB.

Suitable Uses For The Schlüter DITRA HEAT System

Schlüter DITRA-HEAT-DUO is designed as a supplementary heating system, for example for:

  • Heating tiled floors in living rooms and bathrooms in addition to a traditional heating system (barefoot zones)
  • Heating tiled walls in areas such as showers and wet rooms
  • Buildings with very low heating energy needs (e.g. passive energy homes) as a backup
  • Temporary heating of buildings that are only occupied occasionally, e.g. weekend homes

Because of the higher operating costs, the electric floor heating system is not suitable to serve as a full-scale heating system. In those cases, heating with Schlüter-BEKOTEC-THERM is recommended.

Schlüter DITRA-HEAT Kits consists of a complete range of uncoupling matting, heating cable, thermostat and sensors and can be purchased in complete box sets and as individual components for larger areas.

Each kit consists of the following components:

  • Schlüter DITRA HEAT TB Uncoupling Mats
  • Schlüter DITRA HEAT Heating Cables
  • Schlüter DITRA HEAT Thermostat Set

The sets include all required materials for installing your floor heating systems in a convenient package. All you have to purchase is tiles and adhesive.

Available Schlüter DITRA-HEAT-DUO Kits

CodeUncoupled Area (m2)Heated Area (m2)

Please note that Schlüter DITRA-HEAT-DUO matting must be installed using a C2 cement based adhesive and not Ardex AF200.

* See Delivery page for details


We accept the following payment methods
Back To Top